Cheap best 2hp vfd Three Phase Inverter

Project

Technical Parameters

Enter

Rated voltage，frequency

3PH AC380V；50Hz/60Hz

1PH  AC220V；50Hz/60Hz

Voltage allowable variation range

3PHAC360V~450V

1PHAC190V~250V

Output

Voltage

0～440V

0～220V

Frequency

0～999.9Hz

Overload capacity

110% long term 150% 1 minute 180% 5 seconds

Control method

V/F control, advanced vector control, simple vector control, torque control

Control characteristics

Frequency setting resolution

Analog input

0.1% of maximum output frequency

Digital settings

0.01Hz

Frequency accuracy

Analog input

Within 0.2% of the maximum output frequency

Digital input

Within 0.01% of the set output frequency

V/F control

V/F curve (voltage frequency characteristics)

The base frequency can be set arbitrarily from 0.5 to 3000Hz, and the multi-point V/F curve can be set arbitrarily. Various fixed curves such as constant torque, reduced torque 1, reduced torque 2, and square torque can also be selected.

Torque boost

Manual setting: 0.0～30.0% of rated output

Automatic lifting: automatically determine the lifting torque according to the output current and combined with the motor parameters

Automatic current limiting and pressure limiting

Whether during acceleration, deceleration or stable operation, it can automatically detect the motor stator current and voltage, and suppress it within the allowable range based on a unique algorithm to minimize the possibility of system fault tripping.

Inductive vector control

Voltage frequency characteristics

Automatically adjust the output voltage-to-frequency ratio based on motor parameters and unique algorithm

Torque characteristics

Starting torque:

100% rated torque at 5.0Hz (VF control)

150% rated torque at 1.5Hz (simple vector control)

150% rated torque at 0.5Hz (advanced vector control)

Operating speed steady-state accuracy: ≤±0.2% rated synchronous speed

Current and voltage suppression

Full current closed-loop control, completely avoiding current impact, with complete overcurrent and overvoltage suppression functions

Undervoltage suppression during operation

Especially for users with low grid voltage and frequent fluctuations in grid voltage, even if the voltage is lower than the allowed voltage range, the system can maintain the longest possible operating time based on a unique algorithm and residual energy allocation strategy.

Typical functions

Multi-speed operation

7-segment programmable multi-segment speed control, multiple operating modes available

PID control

RS485 communication

Built-in PID controller (frequency can be preset);

Standard configuration RS485 communication function, multiple communication protocols optional, with linkage synchronous control function

Frequency setting

Analog input

DC voltage 0～10V, DC current 0～20mA (upper and lower limits optional)

Digital input

Operation panel setting, RS485 interface setting, UP/DW terminal control, and various combination settings with analog input

Output signal

Digital output

1 Y terminal open collector output and 1 programmable relay output (TA, TC), up to 17 meaning options

Analog output

1 analog signal output, the output range can be flexibly set between 0～20mA or 0～10V, which can realize the output of physical quantities such as set frequency and output frequency.

Automatic voltage stabilization operation

You can choose dynamic voltage stabilization, static voltage stabilization, or unstabilized voltage according to your needs to obtain the most stable operating effect.

Acceleration and deceleration time setting

0.1s~999.9min continuously configurable

Brake

Energy consumption braking

Energy consumption braking starting voltage, hysteresis voltage and energy consumption braking rate are continuously adjustable

DC braking

Stop DC braking starting frequency: 0.00～[F00.05] upper limit frequency

Braking time: 0.0～30.0s; Braking current: 0.0%～50.0% of motor rated current

Low noise operation

The carrier frequency is continuously adjustable from 2.0KHz to 20.0KHz to minimize motor noise.

Speed tracking restart function

It can realize smooth restart and instantaneous stop restart function of the running motor.

Counter

An internal counter to facilitate system integration

Run function

Upper and lower limit frequency settings, frequency jump operation, reverse operation limit, slip frequency compensation, RS485 communication, frequency increase and decrease control, fault self-recovery operation, etc.

Operation panel

Show

Double-row LED display, display status can be freely defined according to needs

Operating status

Output frequency, output current, output voltage, motor speed, set frequency, module temperature, PID setting, feedback amount, analog input and output, etc.

Alarm content

It can record two fault records, operating frequency, operating current, DC bus voltage and other operating parameter records when the fault trips.

Protective function

Overcurrent, overvoltage, undervoltage, module failure, electronic thermal relay, overheating, short circuit, input and output phase loss, abnormal motor parameter tuning, internal memory failure, etc.

Environment

Place of use

Indoor, no direct sunlight, no corrosion, no flammable gas, no oil mist, dust, etc.

Ambient temperature

-10℃~＋40℃（The ambient temperature is between 40℃ and 50℃, please derate it for use.）

Ambient humidity

5%~95%RH，No water droplets condensation

Altitude

Derate for use above 1000 meters, and derate by 10% for every 1000 meters.

Structure

Protection level

IP20

Cooling method

Air-cooled, with fan control

Installation method

Wall-mounted